Exclusively for businesses  
Tiếng Việt

Support call center : +84 28 3844 6901

Purchase

Sales representative nationwide

Over 10,000 product codes

For business customers

underbodyprotection-main

GRAVEL THROW AND UNDERBODY PROTECTION

Art.-no. 0892075200

For repairing and restoring the original structure and for protecting against stone chips and corrosion in all visible areas, e.g. front and rear aprons, side members, bumpers and chassis on cars, trucks and buses. Ideally suited for use as an anti-humming compound for wheel wells and chassis.

GRAVEL THROW Black GRAVEL THROW Grey


Rubber-based coating compound containing solvents, can be painted over

  • Excellent adhesion, quick skin formation
  • Scratch-resistant
  • Can be painted over with many commercially available, solvent-based and water-based one-component and two-component top coat paints
  • Suitable for oven drying briefly at 40°C to 60°C
  • Highly sandable once fully dry


ContentsColurArt.no.
1000 mlBlack0892 075 200
1000 mlGrey0892 075 300

tip GRAVEL THROW AND UNDERBODY PROTECTION



Tip for pros

  • Various structures can be sprayed by changing the distance or pressure
  • The colour will become darker by staining it with clear varnish
GRAVEL THROW AND UNDERBODY PROTECTION

Instructions

Shake well before use. The surface must be clean, dry and free from rust and dust. Spray a very thin first coat for improved adhesion and let it flash off for approx. 3 minutes. Then apply the next coat. Allow each intermediate coat to flash off. Operating pressure: 2-4 bar. Optimum spraying distance: 30 cm. The best spraying results are achieved at a processing temperature of

15-25°C.

GRAVEL THROW AND UNDERBODY PROTECTION

Notice

Do not spray on joints, engines, gears and brake systems. After use, turn the can upside down and spray until the valve is empty. Do not dilute, or mix with water or paint. The product can be painted within 24 hours. It can then only be painted once it has been sanded and cleaned.